Maxim公司的MAX17129/MAX17149是高效率白光LED（WLED）驅動器，適合中小型LCD屏采用LED作為光源。工作電壓3-26V，可驅動六串多個LED串聯的LED串，串間電流匹配度在±2%內，支持PWM和混合調光模式，調光比100：1，PWM調光模式的調光頻率100Hz到25kHz，LED電流從10mA到45mA可調，具有LED開路和短路保護以及輸出過壓保護，主要用用在筆記本電腦和平板電腦，顯示器，汽車系統和手持終端。本文介紹了MAX17129/MAX17149主要特性，方框圖，典型工作電路圖以及MAX17129評估板主要特性，電路圖，材料清單和PCB布局圖。

MAX17129/17149：Low-Cost, 6-String WLED Drivers with Quick-PWM Step-Up  Converters

The MAX17129/MAX17149 are high-efficiency drivers for white LEDs. They are designed for small- to mediumsized LCDs that employ an array of LEDs as the light source. An internal switch step-up controller with Quick- PWMK drives the LED array, which can be configured for up to 6 strings in parallel and either 11 LEDs (MAX17129) or 6 LEDs in series (MAX17149) per string. Each string is terminated with a ballast that achieves Q2% currentregulation accuracy, ensuring even LED brightness and provides an adjustable 10mA to 45mA full-scale LED current. The devices have a wide input voltage range of 6V to 26V. The MAX17129 integrates an LDO to simplify applications that have a single high-voltage supply. The devices also feature a low-input-voltage mode for applications that have a 3V to 5.5V supply voltage.

The devices support both PWM and hybrid dimming mode. In PWM dimming mode, the external PWM signal directly controls the brightness of LEDs. The dimming frequency ranges from 100Hz to 25kHz with 400ns minimum on-time. In hybrid dimming mode, the LED current amplitude can be adjusted to 25% of full-scale LED current to improve system efficiency when brightness is low.

The devices have multiple features to protect the controller from fault conditions. Separate voltage-feedback loops limit the output voltage to safe operation. The open and short-LED detection shuts down the faulty string while keeping other strings operating normally.

The devices feature cycle-by-cycle current limit on the internal switch to provide consistent operation and softstart capability. If the devices are in current-limit condition, the step-up converter is latched off after an internal timer expires. A thermal-shutdown circuit provides another level of protection and prevents ICs from damage.

The ICs’ step-up controller features an internal 0.25I (typ), 48V (max) power MOSFET with lossless current sense and accurate cycle-by-cycle current limit. The Quick-PWM control architecture provides fast load-transient response without requiring an external loop compensation component, simplifies the external circuitry, and saves board area. The Quick-PWM control scheme has constant off-time and adjustable pseudo-fixed frequency, which enables a wide variety of applications that can trade off component size for operating frequency. Low feedback voltage at each LED string (275mV typ at 20mA LED current) helps reduce power loss and improve efficiency.

The ICs are available in a 16-pin, thin QFN package with 0.5mm lead spacing. The package is 3mm x 3mm with a maximum thickness of 0.8mm for ultra-thin LCD panel design.

MAX17129/MAX17149主要特性：

3V to 26V Input Supply Voltage

Up to Six Parallel Strings of Multiple Series-Connected LEDs

Step-Up Regulator with Quick-PWM Control Scheme

Two-Level Selectable Switching Frequency

0.25I Internal HV Power MOSFET (48V max)

Low String Feedback Voltage: 275mV at 20mA LED Current

Full-Scale LED Current Adjustable from 10mA to 45mA

±2% Current Regulation Accuracy Between Strings

Support PWM and Hybrid Dimming Mode

100:1 Dimming Ratio

100Hz to 25kHz Dimming Frequency for PWM Dimming Mode

Open and Short LED Protection

Output Overvoltage Protection

Small 16-Pin, 3mm x 3mm Thin QFN Package

MAX17129/MAX17149應用：

Notebook, Subnotebook, and Tablet Computer

Displays

Automotive Systems

Handy Terminals

圖1。MAX17129/MAX17149方框圖

圖2。MAX17129/MAX17149典型工作電路圖
MAX17129評估板

The MAX17129 evaluation kit (EV kit) provides a proven design to evaluate the MAX17129 high-efficiency driver for white light-emitting diodes (WLEDs). The EV kit utilizes a step-up DC-DC converter to generate the voltage required to drive up to six strings of 10 surface-mount WLEDs. The EV kit uses a 3V to 26V input supply and can be configured to provide an adjustable 10mA to 45mA full-scale LED current.

Installed on the EV kit is the MAX17129ETE+. Contact the factory for free samples of the pin-compatible MAX17149ETE+.

MAX17129評估板主要特性：

3V to 26V Input Range

Drives Six Strings of 10 WLEDs

Full-Scale LED Current Adjustable from 10mA to 45mA

Adjustable Switching Frequency of 500kHz or 1MHz

Proven PCB Layout

Fully Assembled and Tested

圖3。MAX17129評估板電路圖
MAX17129評估板材料清單（BOM）：


圖4。MAX17129評估板PCB布局圖
詳情請見：
http://datasheets.maxim-ic.com/en/ds/MAX17129-MAX17149.pdf
和
http://datasheets.maxim-ic.com/en/ds/MAX17129EVKIT.pdf